Tag Archives: water wheels

Active and Passive Circuit Components

Now that we have several different circuit components under our belts, it’s helpful to try to classify the behavior that we’ve seen so far. Resistors, capacitors, and inductors respond in a reliable way to any applied voltage that induces an electric field. Resistors dissipate heat, capacitors store charge, and inductors store magnetic flux.  These responses always occur and cannot be manipulated without manipulating the very structure of the material which causes the response. They don’t add energy or electrons to a circuit, but merely redirect the electrons provided by an external source. Thus these are called “passive circuit components”.

Transistors also have a predictable response to a given voltage, but that response can be changed by tuning the gate voltage in order to open or close the conducting channel. Effectively, the transistor can be in one of two states:

  1. Functioning like a wire with a small resistance, passing most current through while dissipating a small amount of heat.
  2. Functioning like an insulator with a high resistance, blocking most current and dissipating more heat.

The controlling gate which allows us to pick between these two states can actually add energy to the system, increasing the current output, thus the transistor is called an “active circuit component”. Circuits that do calculations or perform operations are usually a combination of active and passive circuit components, where the active components add energy and act as controls, whereas the passive components process the current in a predetermined way. There are other system analogues to this, such as hydrodynamic machines. Instead of controlling the flow of electrons, we can control the flow of water to provide energy, remove waste products, and even perform calculations. An active component would be a place where water was added or accelerated, whereas a passive component might be a wheel turned by the water or a gate that redirects the water. But in electronics, with electrons as the medium, active components add energy and passive components modify existing signals.